Menu
Rate this Item.:
Clean and minimalistic design, good rollers and hardware. Glass could be better though as it chips really easy.
High Quality frame-less shower door. Easy to install and good quality. Seamless delivery from QS supplies
Very elegant and easy to use. This looks just Beautiful in our bathroom.
Submit Your Questions 7 Questions Answered
Have a question about this item? Ask our technical team. We aim to reply within 72 hours.
Dean Asked :In relation to Aquadart Rolla 8 Sliding Shower Door 2000mm High QS-V88631 MFC CODE: AQ8940S, Can you confirm the height of the bottom rail, please?
The rail has a maximum height of 10mm.
Gina Asked :Hi there, does the Rolla 8 need the support bar if fitted in a recess? We would prefer not to have it if possible.
Yes, the Rolla 8 also needs the support arm to be fitted; without this, it will wobble quite a lot and invalidate the guarantee.
Rajesh Asked :Hello. My recess shower is 1210mm wide. Will I be able to use this 1200mm sliding shower door?
I’m afraid the product will only go to 1190mm; however, you can use it in a wetroom, but the door will not touch the wall. The other option is to use the Venturi 6 1200mm Sliding Shower Door with a 20mm extension profile kit.
Kevin Asked :The product says it has a generous adjustment. What is this adjustment?
Please have a look at the "Product Variations" tab below the product for adjustment information.
Mark Asked :I have an 1100 x 800mm shower tray after tiling; the tray measures 780mm. Will the 800mm side panel work, or do I need a smaller one?
The AQ8950S will work for you. The minimum adjustment is 765mm, and the maximum is 785mm.
Tracy Asked :Hello, I’m interested in the Aquadart Rolla 8 Sliding Shower Enclosure 1100mm. I have a recess opening of 1100mm, and 9mm wide. I’m just enquiring if I need the recess side kit or use the doors like wet room doors.
You will need to have the recess wall profile.
Jim Asked :Hi, on the Aquadart Rolla 8 1200mm shower door, when fitted between a recess how wide is the fixed screen, and at what point does the support bar that goes from screen to wall mount. I’m worried the bar will interfere with the shower head.
With Roll 8, the T bar must be in that position and cannot be moved. Refer to the attached technical specifications and installations instructions for more information.
We will soon verify the details and add your rating appropriately.