Crosswater Kai-Svelte Digital Bath Filler And Shower Slide Rail Pack 08

• Manufacturing code is DGX008HP
• Suitable for high water pressure systems [also available for low pressure systems - pumped optional]
• Comes in chrome finish
  
• Includes dual outlet Kai trim kit [bath/shower], Digital processor, Bath filler with click clack waste, Svelte slide rail kit
  
• Valve Features and Specifications:
• Consists of 1 x High pressure dual outlet digital valve, 1 x dual dial controller module, 1 x 10m data cable, 1 x power supply, 1 x AC power cable, 1 x flow regulator pack and screw packs
• The dual outlet processor controls bath/shower flow. When you turn it on, the water will automatically flow from the bath outlet – just press once to divert to the showerhead
  
• Size of controller module is - Width 95.23mm x Height 190.23mm
  
• Size of processor is - Width 327.7mm x Depth 224.5mm x Height 88mm
  
• Precise temperature - A built-in thermistor checks every 10th second to ensure the water stays as close as possible to the set temperature
  
• Easy divert - Divert the flow quickly and easily between outlets with just a few touches. Press the lower control, one touch switches from bath filler to the showerhead
  
• Cool-touch metal controls - Controls are kept completely separate from the water in the valve, which means they always stay cool and safe to touch
  
• Colour-changing controls - Switch on the shower the controls flash white as the water heats up to the set temperature. If you adjust the temperature, the LEDs flash red to let you know when the water is warming up and blue when it’s cooling down. As soon as the desired temperature is reached, the controls stop flashing and glow white
  
• Installation - Push-fit isolation valves and a standard electrical plug fitting, as well as easy to set up cable connections, make the shower extremely simple to install
  
• Cleaning mode - Activate to clean the controls without accidentally turning on shower. Simply press and hold the power button to enable cleaning mode, which lasts for 1 minute
  
• Consistent temperature - The advanced thermostatic control automatically keeps the water at the set temperature - even if someone turns on a tap
  
• Automatic shut-off - If water or power supply fails, the shower will turn of completely keeping you and your family safe
• WRAS and TMV2 approved
  
• Technical Details:
• Maximum Static Pressure: 700kPa [7 bar]
  
• Minimum Maintained Pressure: 50kPa [0.5 bar]
  
• Supply Pressure Differential: Nominally equal
  

• Supplied factory-set at a maximum outlet temperature of shower outlet 41°C / bath outlet 44°C. The maximum temperature of both outlets can be reset to 46°C during set-up if preferred by the user
  
• Hot Water Range: 55°C - 65°C
  
• Cold Water Range: 1°C - 20°C
  
• Temperature Control: Thermostatic control throughout the temperature range of 15°C to 46°C
  
• Ambient Valve Temperature: 1°C - 40°C
  
• Maximum Relative Humidity: 95% non-condensing
  
• Flow Rate: Bath outlet - 17 L/min and shower outlet - 15 L/min maximum @ 1.0 bar [may vary significantly depending on inlet maintained pressure, pipework and spray mode of fitted accessories]
  
• Electric Supply: Supply voltage - 230V RMS 50 Hz +/- 10% and maximum load - 30W
• Svelte Slide Rail Kit:
• Rail with integrated wall outlet
• Single function handset
• 11mm x 1.5m [1500mm] hose
• Bath Filler with Standard Click Clack Waste:
• Slim line 30mm projection
  
• Flexible overflow for easier installation and fitting inside odd bath shapes
  
• Smooth and simple click clack waste - simply press with your foot
  
• 3 in 1 - inlet / outlet and overflow function
• Download installation and user guide PDF from technical tab
• Watch or download videos showing the installation from technical tab
  
• 5 years of warranty against any manufacturing defects
• Optional Products: For Low Pressure System and Remote Control.

Note: This product MUST be installed by a competent person in accordance with all current relevant statutes and regulations, including building regulations and the Water Supply [Water Fittings] Regulations 1999 [together the Water Supply Regulations]. All showers requiring an electrical connection MUST be installed by a qualified person following the latest revision of BS7671 [Wiring Regulations] and certified to current building regulations. Before any electrical connections are made, the electrical supply must be turned off at the main switch.
Warning! If the maximum temperature is reset to 46°C this is entirely at the risk of the owner and the manufacturer can accept no liability for any resulting injury.
Cleaning: Only use a mild washing up detergent or soap solution, and then wipe dry using a soft cloth. Avoid using household cleaners containing abrasives and chemical substances.