Hudson Reed Tec Dual Thermostatic Shower Valve Chrome

Hudson Reed Tec JTY025 Details

The Hudson Reed Tec Thermostatic Dual Exposed Shower Valve strikes the perfect balance between luxury styling and exquisite craftsmanship. It features an exposed wall-mounted installation made from solid brass. The brass body is encased in a smooth chrome finish. WRAS approved, it requires a minimum water pressure of 0.1 bar [LP-Low Pressure] for smooth functioning. Built-in Thermostatic control assures safety and peace of mind while the anti-Scald feature offers prevention against scalding if hot or cold water fails. You can say goodbye to calcium build up - even in hard water areas due to the patented cartridge's high resistance.

Available in different variations: Concealed and Exposed - [Optional].
It comes in a chrome finish.
Pipe size: 15mm (1.5cm) (1/2inch BSP).
The minimum water pressure recommended for smooth working is 0.1 bar [LP-Low Pressure].
The minimum flow rate is 5.5 litres per minute at 0.1 bar water pressure.
Accurate flow control and excellent flow rates - even at low-pressure.
Thermostatic control to +/- 1 °C even if the water pressure fluctuates.
In the event of hot or cold water failure, the valve will shut down automatically.
The patented cartridge is highly resistant to calcium build-up - even in hard water areas.
Suitable for use with all systems, gravity-fed pumped unvented high pressure or fully modulated combi-boilers.
The cartridge is fully reversible, meaning if hot and cold supplies are the wrong way round, it doesn't need re-plumbing - simply remove the cartridge, turn 180° and replace.
Manufactured using the latest technique of thermostat.
Download the Customer Data Sheet and Installation Instruction PDF File from the Additional Info Section.
Refer to the technical diagram for complete technical dimensions.
Detail For Concealed Valve:.

Concealed wall-mounted installation.
Diameter: Ø185mm (18.5cm).
Size [mm]: 142mm x 173mm [Depth x Height].
Size [cm]: 14.2cm x 17.3cm [Depth x Height].
Inlet centre: 155mm (15.5cm).
Mount Type: Wall / Recess.
Round shape body with two lever handles.
Detail For Exposed Valve:.
Exposed wall-mounted installation.
Size [mm]: 195mm x 150mm x 150mm [Width x Depth x Height].
Size [cm]: 19.5cm x 15cm x 15cm [Width x Depth x Height].
Inlet Centers: 150mm (15cm).
Valve/Cartridge: Quarter turn.
The shower kit shown in the image is not included.

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Colour
: Chrome
⤷ Warranty/Guarantee
: 20 Years
⤷ Material
: Solid Brass
⤷ Theme
: Modern
⤷ Installation Type
: Wall Mounted
⤷ Inlet Centres
: 150
⤷ Minimum Operating Pressure (Bar)
: 0.1
⤷ Flow Rates (l/min)
: 0.1 bar - 5.5, 0.5 bar - 14.5, 1 bar - 22, 2 bar - 30, 3 bar - 35
⤷ Handle Style
: Lever

⤷ WRAS Approved
: Yes
⤷ Depth
: 140
⤷ Temperature Control
: Thermostatic
⤷ Anti-Scald
: Yes
⤷ Number of Handles
: 2
⤷ Plumbing System Compatibility
: All
⤷ Plumbing Option
: Concealed | Exposed
⤷ Cartridge Included
: Yes
⤷ Cartridge Type
: Quarter Turn

Additional Info & Downloads

Download the Customer Data Sheet For Concealed Shower Valve Pdf File Download the Customer Data Sheet For Exposed Shower Valve Pdf File Download the Installation Instruction Pdf File

Total: £162.12 2 Working Days Approx QS Supplies

6 Features Included In This Product Explained

Thermostatic Control

Thermostatic shower control works behind the scenes to achieve or maintain water temperature output from a showerhead. With the built-in safety feature, the shower provides a consistent water temperature.
Read more...

Combi-Boiler System

The showerhead or shower system is suitable for use with a Combi-Boiler System. This system heats cold water on demand, relying solely on mains pressure to move water around your home. These are suitable for mixer showers, as they provide hot water instantaneously and at the highest pressure.

Unvented System

The unvented water systems usually have a separate hot water cylinder, which is pre-heated via a combi boiler or other heating sources to store a quantity of hot water at mains pressure.

WRAS Approved Product

WRAS Approval means that the particular water fitting or product complies with or meets the requirements specified by the Water Supply (Water Fittings) Regulations or Scottish Byelaws. Such compliance is based on certain tests that prove that the product or fitting does not cause waste, misuse, contamination or undue consumption of the public water supply system in the UK.
Read more...

Low Water Pressure

Water systems operating at a pressure between 0.1 and 0.4 bar are considered low pressure. Products usually come labelled if they are suitable to use under such pressure.
Read more...

Ceramic Disc Cartridge

It has two ceramic discs, one fixed in place and the other moveable with the tap or valve handle. It is the most common technology used in modern tapware as it offers unmatched advantages such as no leaks and drips and saves on water and money.
Read more...

Questions & Answers

Submit Your Questions 1 Questions Answered

Have a question about this item? Ask our technical team. We aim to reply within 72 hours.

Andrew Asked :
Hudson Reed Tec Dual Thermostatic Shower Valve JTY025. Can you confirm that the inlet connection can swivel vertical, or are the arms fixed in the horizontal position per the diagram?

Answered By QS Team