Stuart Turner Techflo TP Standard 1.5 Bar Twin Shower Pump


MFC CODE: 49084


RRP: £148.80


3 Working Days Approx

Not Yet RatedNo Rating

Review this Product

Shipping: £6.95


Stuart Turner Techflo Standard Twin Shower Pump is a centrifugal pump designed to boost water flow to an individual shower, bath, shower mixer or mixer tap. It is built using high-grade material for durability and hardwearing ability. Suitable for positive head application only, the pump is operated by a flow switch that automatically starts when a sufficient water flow through the outlet is detected. For maximum convenience and flexibility, it boosts both hot and cold water. WRAS approved, it comes with a 1-year guarantee from the manufacturer.

+  Read what's included..
Please Note all the measurements are in 'mm'
Weight in kg 2.6
Shape Round
Country of Origin UK
Warranty/Guarantee 1 year
Material Plastic
Width 250
Depth 97
Height 152
Compliance/Approvals/Standard WRAS
Product Type Shower Pump
Bar Rating 1.5
Pump Type Centrifugal
Impeller Twin
Head Positive
Motor Type Series Wound, Auto-Reset Thermal Trip
Motor Rating 30 mins on/off
Fuse rating 3 Amps
Power Supply 230 Volts AC
Power Consumption 200 Watts
Maximum Operating Pressure (Bar) 3 Bar
Mechanical seal Nitrile/Carbon/Silicon Carbide
Anti Vibration Feet Yes
Flexible Hoses 4
Dry Run Protection Yes

Stuart Turner 49084 DETAILS

  • Centrifugal pump
  • Constructed from durable plastic
  • Manufacturing code of this product is 49084
  • Designed to boost the incoming hot and cold water supply to an individual shower, bath, shower mixer or mixer tap
  • Suitable for positive head application only
  • Pump is operated by a flow switch, automatically starting when a gravity flow of water greater than 0.6-0.8 ltrs/min through the outlet is detected. It will automatically stop when the outlet is closed and the flow ceases
  • Designed to boost both hot and cold water supplies equally
  • 15mm push in flexible hoses
  • G 3/4 threaded connections
  • Require a flow of 0.8 l/min through the outlet to start
  • Features fully automatic switching and dry run protection
  • Features anti-vibration feet and pre-wired with 1.5 metre power cable
  • WRAS approved
  • Size: Length 250mm x Width 97mm x Height 152mm
  • 1 year guarantee from the manufacturer
  • Technical Specifications:
  • Mechanical seal - Nitrile / Carbon / Silicon Carbide
  • Maximum head [closed valve] - 1.5 bar
  • Performance @ 9 l/min - 1.1 bar
  • Performance @ 18 l/min - 0.7 bar
  • Maximum Flow - 32 l/min
  • Maximum static inlet and outlet pressure - 10 metres
  • Maximum working pressure* - 300 kPa [3 bar]
  • Maximum ambient air temperature - 40 °C
  • Min / Max water temperature** - Min 4 °C / Max 65 °C
  • Flow switch sensitivity [approximately] - 0.8 l/min
  • Flexible hose connections: G 3/4 female x 15mm push-in x 200mm long
  • Power supply / phase / frequency - 230 V a.c. / 1 / 50 Hz
  • Current [full load] - 1.2 Amps
  • Power consumption - 200 Watts
  • Fuse rating - 3 Amps
  • Power cable [pre-wired] - 1.5 metres
  • For more technical information and installation manual, download PDF from technical tab.

* The maximum pressure that can be applied to the pump under any installation conditions.
** A stored water temperature of 60 °C is considered sufficient to meet all normal requirements and will minimise deposition of scale in hard water areas.

Sizes Available
Other Sizes / Finishes / Variations Available.
QS Code Finish Size / Difference MFC Code
QS-V8340 - 2.0 bar 49085


Total: £106.61 3 Working Days Approx QS Supplies

You've Selected which adds to a total of

You May Also Require



Rate this Item.:

Write Your Review.

Review title
Please enter your review

How Many Stars Would You Give for the Following?

Rate the product on quality
Value For Money:  
Rate the product on value for money
Rate the product on style

Ask A Technical Question
Please enter your name

Please enter your valid email address

Please enter your question

Delivery & Returns
Please enter postcode

At QS Supplies, we use trustworthy carriers for deliveries across UK, Scotland and Ireland. We also follow an up-to-date tracking system to keep you posted on the status of your orders. Delivery dates are approximate, and therefore, we suggest you do not schedule any installation work until you have received the items. To learn more about our delivery service, click here.


For complete information on returns, click here.

Notify me when this product is in Stock
Please enter your name

Please enter your valid email address

Please enter your contact no


Added Cart Added to Cart

View Cart
Thank You For Your Rating

We will soon verify the details and add your rating appropriately.