Nuie Victorian Rectangular Chrome Triple Concealed Thermostatic Shower Valve

Nuie Victorian ITY315 Details

This elegantly appealing Nuie Victorian Rectangular Triple Concealed Thermostatic Shower Valve will bring a stylish touch to any traditional or modern bathroom. Suitable for both low and high water pressure systems, this WRAS approved shower valve comes with added safety benefit of full thermal protection against scalding, in the event of cold or hot water shut off. Built from top quality brass, this shower valve will deliver excellent water flow rate even at low pressure. Suitable for both vertical and horizontal installation, this shower valve comes with ten years of guarantee against any manufacturing defects to ensure your peace of mind.

Former Known as Premier Victorian Rectangular Triple Concealed Thermostatic Shower Valve - ITY315.
The manufacturing code of this product is ITY315.
It comes in a fabulous chrome finish.
Features stain and rust resistant.
Can be fitted vertically or horizontally.
Accurate flow control.
Thermostatic control to +/- 2 to 3 °C even if the water pressure fluctuates.
In the event of hot or cold water failure, the valve will shut down the water supply, providing full thermal protection and preventing scalding.
The patented cartridge is highly resistant to calcium buildup - even in hard water areas.

Suitable for use with all systems: gravity-fed pumped unvented high-pressure or fully modulated combi-boilers.
Excellent flow rates - even at low pressure.
The cartridge is fully reversible, meaning if hot and cold supplies are the wrong way round, it doesn't need re-plumbing.
Valve/Cartridge Type: 1/4 Turn ceramic disc.
Pipe size: 15mm (1.5cm) (1/2inch BSP).
Suitable for low water pressure system.
Requires a minimum of 0.1 bar or above water pressure.
Download Customer Datasheet And Installation Instruction PDF File from the Additional Info Section.
Refer to the technical diagram for complete technical dimensions.

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Range
: Victorian
⤷ Colour
: Chrome
⤷ Shape
: Rectangular
⤷ Warranty/Guarantee
: 5 Years
⤷ Material
: Brass
⤷ Theme
: Traditional
⤷ Installation Type
: Wall Mounted
⤷ Valve/Cartridge Type
: 1/4 Turn Ceramic Disc
⤷ Minimum Operating Pressure (Bar)
: 0.1
⤷ Flow Rates (l/min)
: 0.1 bar: 5.5 | 0.5 bar: 14 | 1 bar: 20 | 2 bar: 29 | 3 bar: 44
⤷ Handle Style
: Lever | Crosshead

⤷ WRAS Approved
: Yes
⤷ Temperature Control
: Thermostatic
⤷ Backplate Width
: 120
⤷ Backplate Height
: 280
⤷ Anti-Scald
: Yes
⤷ Number of Handles
: 3
⤷ Number of Outlet
: 2
⤷ Orientation
: Vertical | Horizontal
⤷ Plumbing Option
: Concealed
⤷ Cartridge Type
: 1/4 Turn Ceramic Disc

Additional Info & Downloads

Download the Customer Data Sheet Pdf File Download the Installation Instructions Pdf File

Total: £195.86 2 Working Days Approx QS Supplies

8 Features Included In This Product Explained

Thermostatic Control

Thermostatic shower control works behind the scenes to achieve or maintain water temperature output from a showerhead. With the built-in safety feature, the shower provides a consistent water temperature.
Read more...

Combi-Boiler System

The showerhead or shower system is suitable for use with a Combi-Boiler System. This system heats cold water on demand, relying solely on mains pressure to move water around your home. These are suitable for mixer showers, as they provide hot water instantaneously and at the highest pressure.

Unvented System

The unvented water systems usually have a separate hot water cylinder, which is pre-heated via a combi boiler or other heating sources to store a quantity of hot water at mains pressure.

WRAS Approved Product

WRAS Approval means that the particular water fitting or product complies with or meets the requirements specified by the Water Supply (Water Fittings) Regulations or Scottish Byelaws. Such compliance is based on certain tests that prove that the product or fitting does not cause waste, misuse, contamination or undue consumption of the public water supply system in the UK.
Read more...

Ceramic Disc Cartridge

It has two ceramic discs, one fixed in place and the other moveable with the tap or valve handle. It is the most common technology used in modern tapware as it offers unmatched advantages such as no leaks and drips and saves on water and money.
Read more...

Low Water Pressure

Water systems operating at a pressure between 0.1 and 0.4 bar are considered low pressure. Products usually come labelled if they are suitable to use under such pressure.
Read more...

TMV2 Approved Product

TMV2 is an independent certification for thermostatic mixers, including shower valves, run by BuildCert that ensures national and international standards as specified under (BS EN 1111 and 1287) are met. These standards detail the exacting requirements that a thermostatic valve or product must comply with to guarantee a high thermostatic protection and safety standard. Products meeting this requirement carries the logo and protect against any scalding accidents.

TMV3 Approved Product

TMV3 approval means a thermostatic valve is certified and approved for use in healthcare and commercial situations.

Questions & Answers

Submit Your Questions 1 Questions Answered

Have a question about this item? Ask our technical team. We aim to reply within 72 hours.

Chris Asked :
Good morning, I hope you can help me. I have a shower fitted with a triple control concealed thermostatic shower valve we purchased from you in February 2014. The invoice stated this was by Phoenix with a product code of HFVP006. We need to replace the valve cartridge, and I should be very grateful if you could tell me the make and reference number of the cartridge we should buy. The Phoenix model no longer seems available on your site, but the installation guide and appearance appear identical to the Premier triple valve ref ITY315 currently in your online catalogue. Many thanks, and I look forward to hearing from you. Chris de Grouchy 28 Chestnut Grove New Malden Surrey KT3 3JN

Answered By QS Team