Burlington 3 Inch Basin Pillar Taps With Claremont Handles And Regent Base

Burlington CLR1 MED Details

Completely captivating with their perfect proportion and striking chrome finish, the 3 inches Basin Taps from Burlington, are made of brass ingots. The unique in-built aerator suitable for high pressure systems creates a bubbly effect in the water while regulating the flow while the flow straighter, for use in low-pressure systems, prevents splashing and wastage of water. Available in pairs only, the taps are guaranteed by Burlington against manufacturing flaws if any for 15 years.

Available in 2 variations: Full Turn, Quarter Turn.
Comes in pair.
Regent small pair of tap bases offer an extra height of 30mm to the standard tap bases.
The regent base also adds a further 30mm distance away from the wall when wall-mounted.
Traditional style.
Four spindle heads with ceramic indices in the centre.
Height: 166mm (16.6cm).
Centre of the inlet to centre of outlet: 87.3mm (8.73cm).

G 1/2" inlet connections.
Supplied with flow straighter - this is for use with low water pressure.
Supplied with neoperl aerator - this is for use with high water pressure.
Suitable for both low and high-water pressure systems.
For specific flow rates - See the additional image.
Compliance/Approval: BS 5412:1996 specification for low-resistance single taps and combination tap assemblies (nominal size 1 and 3) suitable for operation at PN 10 max. And a minimum flow pressure of 0.01 MPa (0.1 bar) BS EN 200:2008 Sanitary tap ware. Single taps and combination taps for water supply systems of type 1 and type 2. General technical specification.
Download the Installation Instruction PDF File from the Additional Info Section.

Info / Size (mm)

Taps
Pipe Center: 87.30 mm

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Water Activation
: By Rotating
⤷ Tap Body Shape
: Round
⤷ Handle Position
: Upwards
⤷ Colour
: Chrome
⤷ Warranty/Guarantee
: 15 Years
⤷ Material
: Solid Brass
⤷ Theme
: Traditional
⤷ Installation Type
: Deck Mounted
⤷ No. of Holes Required
: 2
⤷ Base To Spout
: 50

⤷ Spout Reach
: 87.3
⤷ Overall Height
: 219
⤷ Width
: 65
⤷ Inlet Connections
: 1/2"
⤷ Minimum Operating Pressure (Bar)
: 0.01
⤷ Handle Style
: Crosshead
⤷ WRAS Approved
: Yes
⤷ Compliance/Approvals/Standard
: BS 5412:1996 BS EN 200:2008
⤷ Barcode
: 5057199960177
⤷ Product Type
: Basin Pillar Tap

Additional Info & Downloads

Download the Installation Guide Pdf File

Total: £134.58 2-3 Working Days Approx QS Supplies

5 Features Included In This Product Explained

Neoperl Aerator

Neoperl aerators are components that perform some critical functions in taps and showers. They control the flow stream's straightness and diameter while reducing splashing by adding air to the stream. This effectively saves water and, thereby, water bills. It is compliant with local plumbing codes and standards.

WRAS Approved Product

WRAS Approval means that the particular water fitting or product complies with or meets the requirements specified by the Water Supply (Water Fittings) Regulations or Scottish Byelaws. Such compliance is based on certain tests that prove that the product or fitting does not cause waste, misuse, contamination or undue consumption of the public water supply system in the UK.
Read more...

High Water Pressure

Water systems operating at 1.0 bar or higher pressure are considered high-pressure systems. Products usually come labelled if they are suitable to use under such pressure.

Low Water Pressure

Water systems operating at a pressure between 0.1 and 0.4 bar are considered low pressure. Products usually come labelled if they are suitable to use under such pressure.
Read more...

Optional: Quarter Turn

Operating these taps is almost effortless; it can be turned on and off by rotating the lever at 90 degrees. These taps have such low friction that they are perfect for people with arthritis, weak grip, the elderly and the young.

Burlington 3 Inch Basin Pillar Taps With Claremont Handles And Regent Base

MFC Code: CLR1 MED

Burlington CLR1 MED Details

Technical Specifications

Additional Info & Downloads

5 Features Included In This Product Explained

Reviews & Ratings