Heritage Dawlish Bath Shower Mixer Tap

Heritage Dawlish TDCC02 Details

The Heritage Dawlish Bath Shower Mixer Tap is an intricately designed vintage bath and shower mixer tap that will add classic luxury to your bathroom. The product comes with a traditional shower handset, a wall bracket and a 1.5-meter shower hose. The crosshead handles and the phone-style handset give it its traditional look, while the chrome, vintage gold or brushed nickel finish offers it a more contemporary and clean-looking shine.

Formed from perfect metal in a dramatic vintage style with crosshead levers, the design is sure to make maximum impact at the bathtub. The entire product is made out of the highest quality brass, which stops it from rusting over time. The tap measures 340 millimetres in height. This tap creates a traditional look to your bathroom when used with a traditional towel rail.

Supplied with 1.5m hose, traditional shower handset and wall bracket.
It comes in a crosshead handle.
Suitable for all plumbing systems.
Flow type is single.
Please note that the images shown are for illustration purposes only.
The minimum water pressure recommended for smooth working is 0.2 bar [LP-Low Pressure] and a maximum of 5.0 bar [HP-High Pressure].
Inlet connections: G 3/4 inch BSP.

Valve type: Quarter turn 3/4inch ceramic disc valves.
Size [mm]: 250mm x 340mm [Depth x Height].
Size [cm]: 25cm x 34cm [Depth x Height].
The centre of the inlet to the centre of the outlet is 178mm [17.8cm].
Inlet centre: 150-200mm [15-20cm].
For complete size details, please refer to the technical drawing.
Download the installation instruction PDF file from the additional info section.

Info / Size (mm)

Tap
Pipe Centre: 152.5 mm

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Water Activation
: By Rotating
⤷ Handle Position
: Left & Right
⤷ Tap Body Shape
: Round
⤷ Range
: Dawlish
⤷ Colour
: Chrome
⤷ Warranty/Guarantee
: 10 Years
⤷ Material
: Brass
⤷ Theme
: Traditional
⤷ Installation Type
: Deck Mounted
⤷ No. of Holes Required
: 2
⤷ Spout type
: Fixed

⤷ Base To Spout
: 37
⤷ Spout Reach
: 178
⤷ Inlet Centres
: 150-200
⤷ Overall Height
: 340
⤷ Minimum Operating Pressure (Bar)
: 0.2
⤷ Hose Included
: Yes
⤷ Hand-Shower Included
: Yes
⤷ Flow Rates (l/min)
: 23.2 at 0.2
⤷ Handle Style
: Crosshead
⤷ Barcode
: 5055138554289
⤷ Product Type
: Traditional Bath Taps

Additional Info & Downloads

Download the Spares Drawing Pdf File Download the Fitting Instructions Pdf File

Customise Your Product

Standpipes

Standpipes are decorative pipework designed to support taps or mixers near freestanding baths and conceal the water pipes fed from under the floor. Standpipes can be cut down to size to fit your Chosen bath (for use with baths without tap holes).

None
OP-32361 - Chrome Finish Standpipes - THC20 + £306.84
OP-32363 - Vintage Gold Finish Standpipe - THA20 + £377.60

Shroud Pipes

Decorative pipework to conceal water pipes fed from under the floor to Bath mounted taps and mixers; use baths with taphole. The image shown is just for illustration purposes only.

None
OP-32364 - Chrome Finish Shrouds - THC30 + £189.97
OP-32365 - Vintage Gold Finish Shrouds - THA30 + £252.95

Total: £248.28 3-4 Working Days Approx QS Supplies

4 Features Included In This Product Explained

Diverter

A diverter, specifically in bath-shower combos, redirects the water flow from the bathtub spout to the showerhead. You can activate it using the nozzle in the bath shower mixer tap.
Read more...

Low Water Pressure

Water systems operating at a pressure between 0.1 and 0.4 bar are considered low pressure. Products usually come labelled if they are suitable to use under such pressure.
Read more...

High Water Pressure

Water systems operating at 1.0 bar or higher pressure are considered high-pressure systems. Products usually come labelled if they are suitable to use under such pressure.

Quarter Turn

Operating these taps is almost effortless; it can be turned on and off by rotating the lever at 90 degrees. These taps have such low friction that they are perfect for people with arthritis, weak grip, the elderly and the young.

Reviews & Ratings

By: Anthony From : Chester Overall Rating: Date: March 17, 2016 Best Price Available

I purchased this item at a price I never thought would be possible. Fantastic price and great service

Helpful?

2 of 2 People have found this Review useful

Quality:

Style

Value for Money

Questions & Answers

Submit Your Questions 1 Questions Answered

Have a question about this item? Ask our technical team. We aim to reply within 72 hours.

Patrick Asked :
Re: the Heritage Dawlish 1924 bath shower mixer tap TDCC02 - is the distance between the tap centres adjustable? The diagram shows as 1525mm, but the old one that we want to replace is 1900mm. There is a model that does adjust - is this it?

Answered By QS Team