Hudson Reed Art Twin Concealed Thermostatic Shower Valve

Hudson Reed Art ART3210 Details

If its a modern shower valve with unmatched reliability that youre after, then look no further than this Art Twin Concealed Thermostatic Shower Valve from Hudson Reed. The sleek design lines feature a rectangular backplate upon which a lever and a square knob serve to control the valves working. Minimalist slim design and chrome finish make for a simple yet elegant aesthetic that is sure to please. Enjoy the heavily discounted price offered right here at QS Supplies. Suitable to use with Shower Enclosure and with the bathtubs as well.

Available with or without Diverter [Optional].
Back plate size [mm]: 120mm x 135mm x 215mm [Width x Depth x Height].
Back plate size [cm]: 12cm x 13.5cm x 21.5cm [Width x Depth x Height].
Handle design: Lever and Square.
Number of handles: 2.
Back-plate: Rectangular.
It can be installed vertically or horizontally.
Mount Type: Wall / Recess.
Minimalist slim design.
Suitable for all plumbing systems - gravity-fed pumped unvented high pressure or fully modulated combi-boilers.
Pipe Size: 15mm (1.5cm) (1/2inch BSP).

Manufactured using the latest technique of thermostat.
Suitable for low-pressure water system.
Requires 0.1 bar operating water pressure.
WRAS approved (Shower valve without diverter only).
Accurate flow control even at low water pressure and maintains excellent flow rates.
Thermostatic control to +/- 2 degrees even if the water pressure fluctuates.
In the event of hot or cold water failure, the valve will shut down the water supply and prevents scalding.
The patented cartridge is highly resistant to calcium buildup - even in hard water areas.
The cartridge is fully reversible; meaning doesn't need re-plumbing if hot and cold supplies are the wrong way round it.
For more details, Refer to the technical drawing.
The installation manual (PDF) is available below.

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Colour
: Chrome
⤷ Shape
: Rectangular
⤷ Warranty/Guarantee
: 20 Years
⤷ Material
: Brass/ABS
⤷ Theme
: Modern
⤷ Installation Type
: Wall Mounted
⤷ Minimum Operating Pressure (Bar)
: 0.1
⤷ Flow Rates (l/min)
: 0.1 bar - 5.5, 0.5 bar - 14, 1 bar - 20, 2 bar - 29, 3 bar - 44
⤷ Handle Style
: Lever, Square
⤷ Depth
: 135

⤷ Temperature Control
: Thermostatic
⤷ Backplate Width
: 120
⤷ Backplate Height
: 215
⤷ TMV2 Approved
: Yes
⤷ TMV3 Approved
: Yes
⤷ Number of Handles
: 2
⤷ Orientation
: Vertical or Horizontal
⤷ Plumbing Option
: Concealed
⤷ Cartridge Included
: Yes
⤷ Cartridge Type
: 1/4 Turn Ceramic Disc

Additional Info & Downloads

Download the Fitting Instructions Pdf File Download the DataSheet For Shower Valve Pdf File

Total: £168.47 2 Working Days Approx QS Supplies

7 Features Included In This Product Explained

Thermostatic Control

Thermostatic shower control works behind the scenes to achieve or maintain water temperature output from a showerhead. With the built-in safety feature, the shower provides a consistent water temperature.
Read more...

Combi-Boiler System

The showerhead or shower system is suitable for use with a Combi-Boiler System. This system heats cold water on demand, relying solely on mains pressure to move water around your home. These are suitable for mixer showers, as they provide hot water instantaneously and at the highest pressure.

Unvented System

The unvented water systems usually have a separate hot water cylinder, which is pre-heated via a combi boiler or other heating sources to store a quantity of hot water at mains pressure.

Optional: Diverter In Showers

A diverter, specifically in bath-shower combos, redirects the water flow from the bathtub spout to the showerhead. You can activate it using the nozzle in the bath shower mixer tap.
Read more...

Ceramic Disc Cartridge

It has two ceramic discs, one fixed in place and the other moveable with the tap or valve handle. It is the most common technology used in modern tapware as it offers unmatched advantages such as no leaks and drips and saves on water and money.
Read more...

Low Water Pressure

Water systems operating at a pressure between 0.1 and 0.4 bar are considered low pressure. Products usually come labelled if they are suitable to use under such pressure.
Read more...

WRAS Approved Product

WRAS Approval means that the particular water fitting or product complies with or meets the requirements specified by the Water Supply (Water Fittings) Regulations or Scottish Byelaws. Such compliance is based on certain tests that prove that the product or fitting does not cause waste, misuse, contamination or undue consumption of the public water supply system in the UK.
Read more...