QS Supplies

Order Hotline: 0116 251 0051

Call us today until 7pm | Help?

Mira Agile ERD Thermostatic Mixer Shower Chrome - 1.1736.403

QS-V78646 MFC CODE: 1.1736.403


RRP: £435.60 You Save £186.94 on RRP

4.5 out of 5

2 out of 2 customers rated 90%

Review this Product


2 Working Days Approx

Shipping: £5.95


For perfect showering choose Agile ERD Thermostatic Mixer Shower that is painstakingly manufactured by Mira. This chrome-finished shower includes exposed valve with diverter and controls the temperature and flow individually. It is ideal for use with both mains and low-pressure water systems and includes Magni-Flo technology that gives up to three times more flow than other products in this range, even at low pressure. It is covered with a 5-year guarantee from the manufacturer.

+  Read what's included..

Download the Installation And User Guide Pdf File

Please Note all the measurements are in 'mm'
Colour Chrome
Country of Origin UK
Warranty/Guarantee 5 Years
Valve Included Yes
Valve Type Exposed
Hose Included Yes
Spray Setting 1
Technologies Magni-Flo
Configuration Valve, Rigid Riser, Head, Handset Kit
Temperature Control Thermostatic
Diverter Included Yes
Product Type Shower Set
Plumbing System Compatibility Suitable For Both Mains And Low Pressure Water Systems
Separate temperature and power controls Yes
Handset Included Yes
Valve Size W 205 x D 83
Shower Head Included Yes
Shower Head Size Dia. 200


  • Manufacturing code of this product is 1.1736.403
  • Exposed valve with diverter included
  • Includes 1 spray 20cm deluge fixed showerhead plus separate 9cm 1 spray showerhead - both with rub clean rubber nozzles
  • Ideal for use with both mains and low pressure water systems
  • Comes with separate flow and temperature controls
  • Both heads perform efficiently even at 0.1 bar simultaneously
  • Unique uni-body design means there are no fixings on show
  • Includes Magni-Flo™ technology - Gives up to 3 times more flow than similar mixer showers even at low
  • Revolutionary new installation system with 50mm pipe centres allows easy and quick installation
  • Divert between the two heads or have both on at the same time
  • Compatible with a range of Mira Agile plug-in accessories
  • 5 year of guarantee from the manufacturer
  • Download PDF from technical tab for installation and user guide
  • Easy to service - Incorporates large, long-life filters and replaceable cartridge
  • Spanner-free installation and servicing
  • Pipe and tiling templates included for 1st fix simplicity
  • Patented in-valve push fit connection halves 2nd fix installation time
  • Pipe centres precisely 50mm apart to allow for a standard pipe slice
  • Adjustable slide bar fixings help to match grout lines.

Total: £248.66 2 Working Days ApproxQS Supplies

You've Selected which adds to a total of


Rate this Item.:

Questions & Answers

  Submit Your Questions 2 Questions Asked

Have a question about this item? Ask our tech team. We aim to reply within 72 hours. If you want to know get answers fast, please call us on 0116 251 0051

I have a Mira Agile ERD Thermostatic Mixer Shower. I am not happy with the operating temperature. It always has to set on maximum. I would think it should be around the 5/6 mark. Can this be adjusted and how? Kind regards Peter

Answered By Ian :
Temperature can be adjusted to allow for a hotter maximum. Details are in the commissioning section of the installation manual.

Answered by Verified Purchaser Was this answer helpful? Yes - No

1 - 0

Answered By Glenn :
Try reducing your cold water pressure/ flow I turned my cold water isolation valve a small amount to do this and check the hot water isolation valve is fully open. You should have these valves fitted somewhere nearby to the shower hopefully accessible.

Answered by Verified Purchaser Was this answer helpful? Yes - No

1 - 0

Answered By Steve :
Hi Peter, I have the same shower. Here is a link to the instruction manual http://www.mirashowers.co.uk/onlinecatalog/pdf/1199918-W2-B%20Mira%20Agile%20Pronta%20Installation%20and%20User%20guide.pdf Temperature adjustment is covered under commissioning, there is a hex screw hidden in the unit. Also make sure that the domestic hot water temperature on the boiler is set to maximum.

Answered by Verified Purchaser Was this answer helpful? Yes - No

Answered By ian :
Yes,on the side of the unit where the temperature is regulated,flick the plastic end cap off,this reveals an adjustment screw that is turned with a small Allen type key,turn this in very small increments to adjust to hotter or colder. This is explained in the manual. Hope this helps

Answered by Verified Purchaser Was this answer helpful? Yes - No

Answered By Rowland :
I bought a mira shower and have been asked to answer your question. Mira, I think you should send someone out to replace the shower or refund this gentleman his money. Please also get in touch with me to arrange payment for my consultancy fee.

Answered by Verified Purchaser Was this answer helpful? Yes - No

Does the Mira agile ERD really produce enough water at 0.1 bar for a decent shower or is it "just about ok".? Do you have it in stock

Answered By QS Team :
Hi Hawkins, The item is in stock. Regarding the pressure and flow rate it is difficult for us to comment as this is subjective. What we can say is that the Shower would work on 0.1 Bar pressure. Regards, QS Team.

Was this answer helpful? Yes - No

0   1

Write Your Review.

Review title
Please enter your review

How Many Stars Would You Give for the Following?

Rate the product on quality
Value For Money:  
Rate the product on value for money
Rate the product on style

Ask A Technical Question
Please enter your name

Please enter your valid email address

Please enter your question

Notify me when this product is in Stock
Please enter your name

Please enter your valid email address

Please enter your contact no


Added Cart Added to Cart

View Cart
Thank You For Your Rating

We will soon verify the details and add your rating appropriately.