Menu
Rate this Item.:
Submit Your Questions 3 Questions Answered
Have a question about this item? Ask our technical team. We aim to reply within 72 hours.
Paul Asked :I have a Douglas James square cubicle 800mm nominal. I need to replace the current corner entry glass with an April pivot door and panel; the existing glass extends 710mm from the inside cubicle walls to the corner. Which parts would I need to meet this requirement, please?
You may need the 700mm Side panel - AQ8220S and 800mm Pivot door - AQ9465S.
gerard Asked :I purchased an April Identiti2 Wetroom 1200mm x 1950mm shower screen from you recently and have completed installation into my recently built en-suite. I have a slimline 1200 x 800 shower tray and overhead "rain forest" type shower. It all looks great. Unfortunately, this configuration is not working well as the ensuite floor gets VERY wet with overspray and splashing out of the cubicle. After all the expense, I realise that I will need a door in the open end (800mm shower tray width) There is a door that will suit to enclose the cubicle using the existing shower screen fully. The ensuite's layout is such that the only access that can be gained to the shower is from the 800mm side. Your advice would be very much appreciated.
Dear Gerard! You could purchase a wet room flipper panel, this will add an extra 300mm, but this will also pivot around 260degrees.
Dave Asked :Hi, I have an alcove that is 710 ish mm wide. Is this door saying that it has an adjustment of 700mm - 760mm and would fit my needs? Thanks
This 760mm door has 50mm adjustment for out of true walls - 690-740mm minimum/maximum. Therefore it would fit your recessed space.
We will soon verify the details and add your rating appropriately.