Aqva Eclipse Cloakroom Basin Mixer Tap plays an important role in your bathroom to achieve a well design minimalist bathroom theme. Its solid brass finish body in chrome gives it a modernistic touch that will surely enhance your bathroom appearance.
- Aqva Eclipse Cloakroom Basin Mixer Tap
- Solid brass construction
- Finished in chrome
- 5 years of warranty from manufacturer
- Taps Eclipse Bathroom Cloakroom Basin Mixer Push Waste
- Eclipse Basin Mixer with Push Button Waste Superior than and Pop up waste which is prone to breaking over time.
- Brand New and Boxed Works on any Pressure. *NO NEED TO WORRY ABOUT PRESSURE* IMPORTANT IF YOU WANT WATER AT ALL TIMES. We recommend a matching range of ECLIPSE Bath Mixer, Java Kitchen Mixer which you can see from our shop.
- The Taps and Shower will work on the following systems. combination boiler systems · Gravity fed systems · Pumped hot water systems
- · un-vented hot water systems
- · Std hot water cylinder type systems
- QS EDUCATION ON BUYING TAPS
- According to the Britain Water Regulations Advisory Service Scheme WRAS all items fitting to the water system, be it taps, Toilets should confirm by law to the established WRAS standards. Suppliers selling items fitting onto the water system do not have to have a WRAS certificate. Hence, they are a number of sellers both online and on High Street selling products which are inferior cheap and totally inadequate for long lasting life.Our WRCS Approved Taps have been tested for:
- No Use of Materials which are Hazardous to health and contamination to the water system. Many Imported taps use materials which cosmetically look good but have an allergic reaction to some people. Would you trust your health with cheap imports.?
- All non Metallic materials washers, ceramic disc, cartridges in contact with water are tested and complies to BS6920. To cut cost suppliers will use washers which results in leaking tap. Our Products uses Cartridges which lasts longer.
- The Taps are Pressure tested to 16 Bar. Normal Domestic Pressure is 5 Bar. Therefore our Taps are tested for Leaks. You do not want a Leaking Taps in your Bathroom. Difficult to get the Plumbers in once!
- Mechanical Joints are tested. No Snapping of Joints, welds etc.Our Products are made of Solid Brass. In Order to cut Costs many suppliers will sell their products mixed with ZINC. This is cheap and brittle metal which does not last.
- Would you want to replace the taps in a years time.? It would cost you at least £60.00 Labour to replace the taps.
- Ask the supplier what material are used.?
- [5] Chrome Plating is an expensive process. Our WRAS Taps have 40 microns of chrome thickness Therefore higher corrosion protection. To cut cost suppliers will sell their product with 10-20 micros of chrome thickness resulting in unsightly appearance over short period of time
- Fatigue Test or Confidence Test. The Taps are tested two hundred thousand times times, 200,000, for normal operation to see if it can endure this period of use.
- That's why we give 5 Years Warranty with our taps. Taps without the WRAS certificate may only last you two or three months or at most a year, needing you to replace them again. REMEMBER It costs you to get them changed.
- Buy with Confidence.